Mot de passe oublié ?  
Vous voulez vous inscrire ?  


Reusing a dead Presario 2710 laptop

1 | [2] | 3 | 4 | 5

This article presents how I have reused my dead Presario 2710 laptop and turned it into a KVM console for my server

Taking it apart

Opening the laptop isn't so much a deal in itself. 

Basically, remove all the screws you can find at the back and everything should come apart easily.

Removing the motherboard from the shell is a bit tricky because it is held to the case via the VGA connector side screws. Once these are removed, the motherboard is free and can be taken out.

The keyboard and trackpad are connected to their controller boards via flatflex cables and drawer type connectors. Slide a small screwdriver on the side to open the drawer and the ribbons will come out easily.

Make sure to preserve the trackpad assembly, it is easily reusable.

The LCD frame is attached with screws that are hidden beneath the soft rubber cushions. Once removed, you will find that the frame is also clipped, so simply gently pull it apart and you'll access the panel which is itself screwed to the backframe.

Previous Page
Next Page
1 | [2] | 3 | 4 | 5

Reusing a dead Presario 2710 laptop
[Taking it apart]
LCD Panel
Keyboard and touchpad
Putting it back together

Page: [1] | 

Pas de commentaires
Page: [1]
25 50 100

Le code cbparser BB est activé
Les smileys sont désactivés
[IMG] est autorisé
Les tags HTML sont activés
Les insanités sont interdites
Article Manager module by by George! Software.